Thousands of double cut, beveled, flints for flintlock rifles and pistols. These flints are made for small locks and pistols and measure 5/8″wide by 3/4″ long and are cut from flint mined in Texas by a famous flint knapper, David Boltinghouse. They are excellent flints that can be resharpened after considerable use. I used these flints for many years in the Ten-Ring flintlock pistol we made in the 1970′s and 1980′s. These flints will be sold for $10.00 per 12 plus shipping.
Two sets of double diamond checkered grips: one set cut from Bubinga wood…$40.00, and one set cut from Nicaraguan Cocobolo…$55.00.
The Officers Model grips on the left are Bubinga ($40.00) (SOLD) and the Officers Model grips on the right are Nicaraguan Cocobolo. They are for Officers Model frames with a shortened grip…… ($55.00).
CZ-65 dark Rosewood full checkered grips, were $65.00… NOW $55.00.
Flip-up, custom made, steel sights. I made these dovetail sights back in the early 1980′s as a simple flip up sight for use on either a rifle or hunting revolver. The blade has two settings: the first is an uncut blade so you can cut the style of notch you prefer; the second is a deep “U” for fast acquisition in changing or dark situations (intended for use with a gold bead, white dot or Tritium front). These sights are shown “in the white” but will be soft glass beaded and blued…$25.00 apiece or five for $100.00. Shipping is extra.
Miscellaneous grips for S&W “J” frame, S&W and unknowns probably S&W…$30.00 for all plus shipping.
Colt “D” frame factory grip with gold Colt medallion…$40.00 plus shipping.
Colt “I” frame factory grip. This is a new “take-off” grip..$15.00 plus shipping.
Three sets of new “take-off” grips made by Pachmeyer for the Smith & Wesson large “N” frame revolver…$10.00 per grip plus shipping.
One set of new Browning High Power pistol grips with Old Man Death laser engraved on both grips. The grips are a little too fat for me so I am selling them for… $35.00 a $65.00 value!
Three sets of Bill Wilson diamond checkered walnut grips for the model 1911 with the Wilson logo imbedded…normally $57.00 now, $35.00 per set. SOLD!
Seven sets of new, hard to find full checkered walnut grips for the Detonics pistol or Essex chopped compact pistol frame…$30.00 per set.
Six STI new, never used high capacity magazines. These new magazines sell for $60.00 apiece new, but I will sell them for $35.00 apiece. Only three left; one 10mm, one 9X23, and one 40 Smith & Wesson.
Sling swivel studs: The three in the white (there are actually five) machined from solid bar stock with high top head screws that can be cut flush or domed are for mounting in a butt stock for a sleek custom look. They will accept Michaels and other quick release sling swivels and will not allow the swivels to touch and mar the wood. Brownells sells these for $30.00, but I will sell them for $20.00 apiece.
**One single barrel band swivel stud pictured has a .650″ inside diameter and retails for $55.00, but your cost on this one is $35.00.
**Two blue single barrel band swivel studs have a .780″ and .850″ inside diameter. They retail for $55.00…$30.00 apiece.
C-More Serendipity, Slide-Ride Red Dot Scope, new in the original box. This really fine red dot scope is designed to be installed on a standard model 1911 frame using three screws on each side. These scopes are proven performers, can withstand considerable abuse and recoil and have been installed on thousands of model 1911 pistols over the last 20 years…$240.00 plus shipping.
One Caspian slide for 9mm or 38 Super with a BoMar rear sight cut, dovetail front sight cut, fish scales for cocking serrations and Fish scaling on the top rib. The slide was used to practice applying fish scales and there are a few minor defects. The slide without the fish-scales sells for $255.00 and the fish-scaling is $180.00 for a total value of $435.00 but will sell for…$215.00.
Neidner checkered steel grip caps (5 total) The Neidner checkered plates retail for $24.00 in the Brownells catalogue but I will sell them for $15.00 apiece or all 5 for $65.00. (The silver, brass and buffalo caps shown are sold.) Add $5.00 shipping
One Hawkin style .54 caliber percussion rifle with a 1″ G. R. Douglas 1 X 66 twist, 31″ barrel, Harold Robbins precision percussion lock, brass butt plate, double set triggers, Williams rear aperture sight, and a Globe front. The wood on this fine rifle is hard rock maple with a cast end cap. The markings on top of the barrel are “G. R. Douglas 54” and “Alex H. Blaine” (my name before switching my last and middle name). This rifle has not been fired more than 50 rounds and is in excellent condition and will sell for…$795.00 SOLD ON LAYAWAY! Thank you Walter (04-10-12)
These magazines are the finest made by any manufacturer anywhere for the model 1911. They have welded bases which gives them great strength and durability in abusive conditions. They also have a welded, no wobble, all steel follower (no plastic followers that break down in a short time.) which gives positive slide lock contact and excellent feeding of the last round. As soon as you see your first Metalform you will quickly see why they are the best. They are also the best value for your money of any magazine ever made for the model 1911…$29.00 apiece plus $7.00 shipping.
I now have the same fine American black Walnut grips available in a double diamond cut for the same price as the standard grips above…$55.00 plus $7.00 shipping.
If you are tired of the boring Cocobolo grips and other exotic woods that are really nothing special here are some extra fancy American black walnut grips for any Model 1911that are normally available only from the finest custom grip makers for $150 and more. These beautiful grips are 100% American madeto give you a good gripping surface with excellent, perfectly executed 20 lines per inch full checkering combined with the finest exhibition grade marble cake American walnut available. If you want something really special for your prize model 1911 these grips will give you many hours of pleasure just looking at the magnificent colors and figure. A few sets have beautiful lighter sap wood entwined with the darker wood for beautiful contrast… $55.00 plus $7.00 shipping.
Grips pictured here are representative of the grips for sale, but are not the actual grips being sold.
NOTE: (Calibers listed below are all we have!)
45 ACP @ 5 cents per case – $5.00 per 100 – $25.00 per 500. SOLD!
9mm (several thousand cases @ 5 cents per case)
38 Special (2,900 Cases @ 7 cents per case)
All of the cases were fired here in our shop and used to test various pistols and revolvers. This brass is once fired, mixed head stamp, but all quality stuff. Most, 99%, are in perfect condition and only need cleaning (polishing), depriming, sizing, and normal preparation for loading. A few pieces may have some dings and small dents, but all of that will come out in the resizing stage. These prices are about 25% below current market (most @ 7Cents per case.)..$35.00 per 500 or $65.00 per 1,000 unless otherwise noted. (Sold in lots of 500 only) (UPS shipping is extra.)
(Rick Corbin Pistol) Tripp Research, STI/Caspian compensated IPSC pistol (Serial #SS957) (5248) in 38 Super Clark match barrel, fitted Caspian slide, Weigand 30mm scope mount, wide ambidextrous safety, extended slide stop, extended magazine release, full length recoil spring guide, large magwell, Brown hammer, four high Capacity magazines and TR Gun Kote finish. The trigger is excellent and the rest of the pistol has all the bells and whistles.
This pistol has had no more than 20 rounds fired through so I would class it as in “new” condition and ready to run for the excellent price of $2,500.00.
Birdshead Hammers: These hammers are not only beautiful, but they are functional for those of you who cannot reach the tall, stock hammer. They are all stunningly color case hardened by Turnbull Restorations and should “drop in” your USFA single action…$275.00.
All birds head and Bisley hammers are sold with no indication when any more will be made.
